BDPFN - ALLEN SOLDER PASTE
- MSDS: BDPFN
- Manufacturer: L B ALLEN COMPANY INC
- Product Name: ALLEN SOLDER PASTE
- National Stock Number: 3439-00-255-9935
Product Identification
Product ID:ALLEN SOLDER PASTE
MSDS Date:10/01/1989
FSC:3439
NIIN:00-255-9935
MSDS Number: BDPFN
Responsible Party
WOOD DALE, IL 60191-1240
US
Emergency Phone: 312-678-3097
Info Phone: 708-595-2600
Cage: GO340
Contractor
Telephone: 708-595-2600
Cage: GO340
Ingredients
ZINC CHLORIDE (SARA III)
CAS: 7646-85-7
RTECS: ZH1400000
Fraction By Weight: 25%
OSHA PEL 1 MG/M3/2 STEL
ACGIH TLV: 1 MG/M3/2STEL FUME93
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
Fraction By Weight: 75%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL;9192
Hazards
LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IF EXPOSED TO OVERHEATING OF ZINC
CHLODIRE FUMES MAY EXPERIENCE CENTRAL NERVOUS SYSTEM DISTURBANCES,
GASTROINTESTINAL DISTURBANCES.
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS
CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:MAY PRODUCE METALLIC TASTE IN MOUTH, DIZZINESS
OR NAUSEA
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:IF EXPOSED TO OVERHEATING OF ZINC CHLORIDE RESIDUE;REMOVE TO
ADEQUATE VENTILATION & CALL A DOCTOR
Fire Fighting
Flash Point:410F,210C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:CO*2 OR DRY POWDER
Fire Fighting Procedures:PRODUCT SHOULD NOT BURN APPRECIABLY, BUT IF IT
CATCHES FIRE, EXTINGUISH WITH CARBON DIOXIDE OR DRY POWDER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SCRAPE UP PASTE RESIDUE & DISPOSE IN NORMAL
MANNER,AVOID CONTACT WITH SKIN OR CLOTHING
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID OVERHEATING THE PRODUCT
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE OXYGEN MASK IF EXPOSED TO OVERHEATED ZINC
CHLORIDE FUMES
Ventilation:MECHANICAL
Protective Gloves:RUBBER
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:RUBBER APRON OR JACKET & BOOTS OR SHOES
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
ITEM IS TYPE I AND FORM A OF FEDERAL SPECIFICATION
Chemical Properties
HCC:V1
Boiling Pt:B.P. Text:HIGH
Vapor Pres:NOT GIVEN
Spec Gravity:0.90
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK BROWN PASTE ROSIN ODOR
Percent Volatiles by Volume:>75
Stability
Stability Indicator/Materials to Avoid:YES
POWERFUL OXIDIZING SUBSTANCES
Stability Condition to Avoid:OVERHEATING OF ZNCL*2 RESIDUE
Hazardous Decomposition Products:OVERHEATING MAY PRODUCE TOXIC LEVELS
OF ZN
Disposal
Waste Disposal Methods:BURY IN PIT WITH LIMESTONE IN ACCORDANCE WITH
ALL APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.